Olmsted, Dodge & Goodhue · Free quotes
Pole Barn Builders in Rochester, MN
Describe the building and the land, and a builder calls you back. Request your free quote.
Serving 23 towns across Olmsted, Dodge, Goodhue and Wabasha counties
Get Your Free Pole Barn Quote
Tell us the size, what it's for and where the land is. A builder calls you back with a free quote.
- Free quotes
- No obligation
- Shells to finished buildings
- Site prep included
Fill out the form below for your free quote 👇
Straight answers on building around Rochester
Most people who contact us already know roughly what they want: a shop big enough for the truck and the project, a barn for a few animals, or a barndominium on a few acres outside town. What they lack is a clear path from idea to finished building. Rochester Pole Barns is that path. Fill out the form or call, give us the size, the use and where the land sits, and an independent builder phones you to talk through it and put a free quote in writing.
The builder takes the work from bare ground to a finished building. That includes clearing, a graded pad, the gravel drive, drainage and the utility trench, then engineered drawings and the building permit. After that come the posts or footings, trusses, steel roof and walls, doors and windows, insulation, liner panel and the concrete floor. For a barndominium the builder can also finish the interior, or hand it over as a dried-in shell, whichever you choose.
Southeast Minnesota is not flat farm ground. Around Rochester the land rolls, and toward the Zumbro River and the bluffs it drops into valleys, so a level pad often means cutting into a slope and filling the low side. Posts go below the 42-inch frost line, and trusses are engineered for the snow load on your site. We also check wet spots and tile lines before anyone digs.
What we build
What we build for Olmsted County and its neighbors
Six common building types, each with its own page. Not sure which fits? Describe the job and we will sort it out.
Barndominiums
A house and shop under one steel roof, dried-in or finished, on your Olmsted County acreage.
More on barndominiums
Pole Barn Garages & Shops
Garages and heated shops with the slab, doors, insulation and power rough-in done.
More on pole barn garages & shops
Machine Sheds
Farm equipment storage with tall doors and clear spans for tractors, combines and planters.
More on machine sheds
Horse Barns
Stall barns, run-ins and tack rooms on pasture and acreage across the Rochester area.
More on horse barns
Post Frame Buildings
Engineered post frame buildings for shops, storage, farm and small commercial use.
More on post frame buildings
Pole Sheds & Storage Buildings
Roofed storage for RVs, boats, campers, hay, snowmobiles and lawn equipment.
More on pole sheds & storage buildings
Building ideas
Pole barns, shops and farm buildings
Example photos of the building type.
How it works
From first call to a finished building
- 1
Call or fill out the form
Give us the size, the use and the location of the land. That is enough to start.
- 2
Builder calls you back
You talk through the plan, the site and what the local permit office will want.
- 3
Written quote
You get the scope in writing, so you can see what is covered before you decide.
- 4
Permit, prep and build
The builder files the permit, prepares the pad and builds the structure through to the floor.
Service area
Towns around Rochester we serve
The list runs from Rochester out to Byron, Kasson, Pine Island, Chatfield and Preston, across six counties. Click your town for local detail.
Dodge County
Goodhue County
Mower County
Questions
Pole barn questions
How far down do the posts have to go around Rochester?
Below the frost line (42 inches in this part of the state), with footing pads where the soil needs them, so frost cannot lift the building. Trusses are sized for the snow load on your lot, and the roof is pitched so snow clears doors and walkways.
Who issues the permit, the city or the county?
It depends on where the building goes. Inside a city like Rochester or Byron, the city issues it. In a township, the county often handles zoning and the township may add its own step. Farm buildings on a working farm can skip the State Building Code, but setbacks still apply.
How is the price of a pole barn figured?
Size and wall height come first, then doors, insulation, the floor and how much work the site needs. A sloped lot with a cut-and-fill pad costs more than a flat one, and heat or interior finish adds more. A written quote spells out what is included.
Which towns do you serve?
Rochester, Kasson, Stewartville, Byron, Pine Island, Plainview, Chatfield, Dodge Center, Spring Valley, Oronoco, Eyota, Preston and the smaller towns between them. If your land is in Olmsted, Dodge, Goodhue, Wabasha, Fillmore or Mower county, ask.
Can a barndominium be a finished house or just a shell?
Either. Some owners want a dried-in shell and finish it themselves. Others want the builder to deliver move-in ready, with framing, mechanicals, drywall and flooring. It goes through the full residential permit with energy code and egress.
Can I get a shop with heat and an office?
Yes. Heated shops get insulated walls and ceiling, liner panel and often in-floor heat in the slab, with an office or bath if you want one. Condensation control under the steel roof is part of the plan.
I own land with a slope or bluff edge. Can you build on it?
Often yes. The builder will look at the grade and drainage and plan a cut-and-fill pad or a stepped layout. Say so on the form, and mention the setback from the edge or any waterway.
Tell us what you want to build
One form or one call, and a builder gets back to you.